LEAKOIL Forum

If you have an extra $35K you too can buy a Nissan Figaro! Duncan Imports can hook you up with all your JDM needs.

https://www.duncanimports.com/

As usual I will take the old harness if it is not in the bin....

I decided to put a regulator on the fuel line. I'm not thrilled putting anything in-line in the engine compartment, but until I get a properly dispensing fuel pump, I'm using the regulator. The regulator came with 1/4", 5/16" or 3/8" connectors and obviously I opted for the 1/4"...

Betty Bus wrote: ↑Fri Apr 12, 2019 7:18 am

I would have posted pictures sooner, but I had to have my teenage son explain to me how to do it! Hope this works! Is there a better way to do it so the picture shows up without clicking a link?

You needed to add a bracket to the closing image tag [\img]

You've got me convinced of the need to upgrade brakes. My bus is a 64, but when I first tore it down from original - had a small nut transaxle & had to buy rear brakes for a 63. These conversion kits seem to be different between those two model years. What specific info do I need to get the rig...

Dual Port wrote: ↑Tue Mar 26, 2019 10:36 pm And to think I was kicked out of Geometry class in high school!

That's because textbook classes are usually not related to anything real world.

Dual Port wrote: ↑Wed Mar 06, 2019 10:26 am

Ken wrote: ↑Wed Mar 06, 2019 9:45 am Nice work guys. I have a minor mis-alignment problem on the 68 SC. Your work will be helpful in correcting the problem.

Your '68 will have IRS, if your alignment problem is in the back all of this does not apply.

Probably bad trailing arm bushings.

Ken wrote: ↑Mon Dec 10, 2018 7:39 pm Next thing you know we'll be putting jet engines in our busses!!!

WRX STI engine swaps are pretty close.

Ted, what are the functional differences between a single piston and 4 piston setup? It seems like you see 4p on race cars, Corvettes, and other high end vehicles and single piston on most production vehicles. Obviously a single piston gets a sliding caliper and a 4p gets a fixed caliper. With your...

Dual Port wrote: ↑Wed Nov 28, 2018 8:09 pm

Here's the wiring done by the generator, looking like OE.PB240087.JPG

Bruce, on later vehicles there was a ground installed from the small screw on the generator to the foot of the voltage regulator.