1960 SO-23 A.K.A. Gunther

User avatar
Ken
Posts: 1919
Joined: Mon Dec 15, 2008 8:18 am

Re: 1960 SO-23 A.K.A. Gunther

Post by Ken »

Dual Port wrote: Wed Sep 27, 2017 9:55 am Ken: is there a 5/8" hose nipple on the back side of that breather/oil filler? Or does it vent to the atmosphere?

Option 1- find a 40hp breather like Ken has pictured above. Does anyone know if it will fit the top of Marla's generator stand? (it should?)
Option 2- http://www.ebay.com/itm/Breather-Elemen ... UU&vxp=mtr (or similar)
Option 3- weld a hose nipple on your air cleaner and install a breather hose
Option 4- buy the air cleaner linked in my previous post.

Option 2 might be a little dirty- venting the fumes like that might build up an oil film in the surrounding area. It's a quick fix, though.
Yes there is a 5/8 hose nipple on the oil filler/breather as well as the air cleaner.
Last edited by Ken on Thu Sep 28, 2017 10:42 am, edited 1 time in total.
1963 Single Cab
1964 Bowman & Sons Camper (Vegas Bus)
1966 Westy S0-42 Hardtop
1967 Westy SO-42 Pop Top
1968 Single Cab
User avatar
Dual Port
Posts: 1305
Joined: Fri Apr 30, 2010 10:06 am

Re: 1960 SO-23 A.K.A. Gunther

Post by Dual Port »

I'm glad you chose to get the correct air cleaner, that's the best way to go. There's a bracket that's homemade on your engine that supports the air cleaner, in a perfect world that could be upgraded to a used German one. Keep an eye open at the swap meets or get one off Samba, here's a couple of links to ones listed:
https://www.thesamba.com/vw/classifieds ... id=2071075
https://www.thesamba.com/vw/classifieds ... id=2050197

$20-30 seems pretty pricey, I'd think this is $5-10 tops at a swap meet. Maybe 6v, Ken, or someone here is sitting on one.

You'll need about 2-3 ft of this hose, too.

http://www.wolfsburgwest.com/cart/Detai ... ID=N203741
Bruce Amacker
'66 Deluxe Bus
'65 Standard Bus
User avatar
Marla
Posts: 1534
Joined: Tue Aug 20, 2013 7:14 am

Re: 1960 SO-23 A.K.A. Gunther

Post by Marla »

Lol. Yes that bracket was “temporary” too. Bruce, stop calling out all my flaws. Jeez... :lol: Gunther’s going to get a complex about his rear.

Thanks for the links. I will follow up on it. If anyone has a bracket for sale, let me know.
It's Marla with an " L"
(My list of assets is just too long...)
toolbox
Posts: 902
Joined: Thu Dec 18, 2008 2:58 pm

Re: 1960 SO-23 A.K.A. Gunther

Post by toolbox »

Dual Port wrote: Thu Sep 28, 2017 9:36 am I'm glad you chose to get the correct air cleaner, that's the best way to go. There's a bracket that's homemade on your engine that supports the air cleaner, in a perfect world that could be upgraded to a used German one. Keep an eye open at the swap meets or get one off Samba, here's a couple of links to ones listed:
https://www.thesamba.com/vw/classifieds ... id=2071075
https://www.thesamba.com/vw/classifieds ... id=2050197

$20-30 seems pretty pricey, I'd think this is $5-10 tops at a swap meet. Maybe 6v, Ken, or someone here is sitting on one.

You'll need about 2-3 ft of this hose, too.

http://www.wolfsburgwest.com/cart/Detai ... ID=N203741
The first one listed is for Fresh Air motors and you should get the support finger too so the coil mounting nuts don't pull out or crack the shroud.
User avatar
NIKLES1974
Posts: 38
Joined: Fri Aug 22, 2014 10:12 pm

Re: 1960 SO-23 A.K.A. Gunther

Post by NIKLES1974 »

GUNTHER SHOULD ALSO BE EQUIPPED WITH THE 12 VOLT SILVER STICKER FOR HIS SHROUD. HIS REAR NEEDS TO BE READY AND QUALIFIED TO PASS INSPECTION. (DUAL PORT, FIRST-RATE AND VERY THOUGHTFUL HELP.)
engine1.jpg
engine1.jpg (112.12 KiB) Viewed 3595 times
NICHOLAS ALLCAPS
1974 BRILLIANT ORANGE SUPER BEETLE CONVERTIBLE
ALLCAPS IS MY FONT !
User avatar
Marla
Posts: 1534
Joined: Tue Aug 20, 2013 7:14 am

Re: 1960 SO-23 A.K.A. Gunther

Post by Marla »

Wow, it has been a long time since I have posted an update to this thread. Not entirely due to lack of work being done, just nothing big or worthy of a post.

I decided to ride out COVID 19 up here in Ohio in lieu of being in FL. I am working from home, so while I am here, I figured I'd get back to a project I intended to start 4 years ago. This past weekend I started cleaning and prepping under the front wheel wells. My goal is to clean and seal the surface rust that is under there. As you will see, this was a much needed project to get to.

All in all, it is pretty solid, I was happy with that. No holes in the metal but some Bondo in the area near the jack points. It felt solid and there isn't a lot of it, so I decided to leave that alone.

So far, I cleaned a very hard and thick layer of dirt and grease from the underside. I used a scraper, Zep Purple cleaner and Pine-sol to get it cleaned. I brushed on some Etch and Prep and let it sit over night to seal the rust. Next will be to wipe it down, let it dry and then 2 coats of primer. I will have to wait for the temps to get a little warmer, or put a heater out there to paint.

Below are before pictures and after it has been cleaned. Click the phot to see them right side up.
IMG_3773.JPG
IMG_3774.JPG
IMG_3775.JPG
IMG_3776.JPG
IMG_3777.JPG
IMG_3778.JPG
IMG_3779.JPG
IMG_3780.JPG
IMG_3781.JPG
IMG_3782.JPG
IMG_3783.JPG
It's Marla with an " L"
(My list of assets is just too long...)
Six Volt
Posts: 3724
Joined: Mon Dec 15, 2008 7:25 am

Re: 1960 SO-23 A.K.A. Gunther

Post by Six Volt »

Nice work Marla! Is this the product you are using?

https://www.homedepot.com/p/Klean-Strip ... /100406369

I'm going to do something similar to all my Tacoma frames.
User avatar
Marla
Posts: 1534
Joined: Tue Aug 20, 2013 7:14 am

Re: 1960 SO-23 A.K.A. Gunther

Post by Marla »

That looks like the stuff Sean. They may have changed the label? The bottle I have says Phosphoric Etch and Prep. The directions for rust on metal and prep looks the same. Don't forget to use PPE with it.
It's Marla with an " L"
(My list of assets is just too long...)
User avatar
Dual Port
Posts: 1305
Joined: Fri Apr 30, 2010 10:06 am

Re: 1960 SO-23 A.K.A. Gunther

Post by Dual Port »

Wow, looks good, that bus is a lot cleaner than either of mine was when I got them. Keep up the good work!
Bruce Amacker
'66 Deluxe Bus
'65 Standard Bus
WideFive
Posts: 1270
Joined: Tue Dec 16, 2008 6:00 pm

Re: 1960 SO-23 A.K.A. Gunther

Post by WideFive »

Nice werk!
"There is no restoration process that can give a car legitimacy equal to originality."
Post Reply