2018 Tune Up Day - May 12th

User avatar
Dual Port
Posts: 1016
Joined: Fri Apr 30, 2010 10:06 am

Re: 2018 Tune Up Day - May 12th

Post by Dual Port » Thu Apr 12, 2018 10:02 am

If you are not familiar with the location of my shop, it's in the south part of Berea right near the turnpike and turnpike building. Spudnuts Donuts is about 200 yards north of me (Prospect and Sprague). My address is 686 Prospect, Berea, 44017, which is also State Route 237. It's right near the turnpike crossover on 237, the turnpike building, about 1.5 miles south of Berea downtown, and 2.5 miles north of Rt 82 Strongsville.


BUT- DON'T go to the front building which is marked 686, they won't know what you're there for.
Turn down Greenfield Court, drive 100 yards, and turn right through the gate. If you're using GPS a better address might be 16 Greenfield Ct, Berea, OH 44017. You won't miss my building.
Slide2_zpsurnl8yap.jpg
Slide1_zpscgydpybg.jpg
Rain or shine, we'll see you there Saturday May 12th! There's no specific time, I'll roll in about 8:30 or so, most people will probably drift in about 10ish. There will be hot dogs and maybe other stuff, and some people will bring donuts. Spudnuts is walking distance if you forget. :D
Bruce Amacker
'66 Deluxe Bus
'65 Standard Bus

User avatar
Flamingo
Posts: 144
Joined: Tue Aug 16, 2016 5:20 am

Re: 2018 Tune Up Day - May 12th

Post by Flamingo » Thu Apr 12, 2018 12:49 pm

wwebner wrote:
Thu Apr 12, 2018 7:45 am
Flamingo wrote:
Wed Apr 11, 2018 7:41 pm


Can do. Mat be a most of day job.
Thanks alot! I'm really looking forward to this.😁
I don't weld. I don't fabricate. And I can't even fix most of the things I break. But I do have niche-iness to offer. You're welcome.

User avatar
Ken
Posts: 1861
Joined: Mon Dec 15, 2008 8:18 am

Re: 2018 Tune Up Day - May 12th

Post by Ken » Fri Apr 13, 2018 9:05 am

I would like to do a leak down test and compression check on a 1600 SP motor.
1963 Single Cab
1964 Bowman & Sons Camper (Vegas Bus)
1966 Westy S0-42 Hardtop
1967 Westy SO-42 Pop Top
1968 Single Cab

User avatar
wwebner
Posts: 3268
Joined: Mon Dec 15, 2008 7:34 am

Re: 2018 Tune Up Day - May 12th

Post by wwebner » Mon Apr 16, 2018 8:38 am

If you need tune up parts, plugs,wires,points cond,cap. call Mick at Euclid Foreign 440 465 1985. try to have your distributor #,
Also, I have a supply of shift bushings for most buses,if you have a sloppy shifter,this is a good opportunity to fix it.

User avatar
Frankinbus
Posts: 167
Joined: Thu Jul 17, 2014 11:08 pm

Re: 2018 Tune Up Day - May 12th

Post by Frankinbus » Mon May 07, 2018 7:49 pm

my drivers door bottom hinge is tearing off at the rivets. my bentley manual says to weld the rivets on the inside and put a reinforcement plate on , they even have a part number for the plate. also the piping at the top of the door card came unstapled, does someone have a small stapler for that. thanks
!cid__Picture0507181930_1.jpg
!cid__Picture0507181924_1.jpg
!cid__Picture0507181923_1.jpg
65 11 window bus
2012 turbo beetle
1964 berry mini t buggy

User avatar
wwebner
Posts: 3268
Joined: Mon Dec 15, 2008 7:34 am

Re: 2018 Tune Up Day - May 12th

Post by wwebner » Mon May 07, 2018 9:14 pm

I have the stapler,will bring.

User avatar
Karl Kombi
Posts: 89
Joined: Wed Sep 27, 2017 9:56 am

Re: 2018 Tune Up Day - May 12th

Post by Karl Kombi » Tue May 08, 2018 8:50 pm

I know there was some talk of moving Tune Up Day back due to Bruce's schedule. Is it still Saturday morning?
Thanks! :|

User avatar
Marla
Posts: 1099
Joined: Tue Aug 20, 2013 7:14 am

Re: 2018 Tune Up Day - May 12th

Post by Marla » Wed May 09, 2018 5:05 am

Yes. No changes. We are still on for Sat.

I plan on picking up some donuts. The hot dog machine will be rolling. Come on out and chat even if you aren’t planning on working on a project.
It's Marla with an " L"
(My list of assets is just too long...)

User avatar
Flamingo
Posts: 144
Joined: Tue Aug 16, 2016 5:20 am

Re: 2018 Tune Up Day - May 12th

Post by Flamingo » Thu May 10, 2018 11:37 pm

I will be bringing a couple of bags of McDonald's breakfast foods and an assload of cheap beer. 😁
I don't weld. I don't fabricate. And I can't even fix most of the things I break. But I do have niche-iness to offer. You're welcome.

User avatar
Six Volt
Posts: 3205
Joined: Mon Dec 15, 2008 7:25 am

Re: 2018 Tune Up Day - May 12th

Post by Six Volt » Fri May 11, 2018 6:44 pm

wwebner wrote:
Mon Apr 16, 2018 8:38 am
Also, I have a supply of shift bushings for most buses,if you have a sloppy shifter,this is a good opportunity to fix it.
The Lurchmobile needs bushings. Can you bring a set for a '78 bay? I'll cover you when you get there.
It's me, Sean
1957 Beetle Oval Sedan 36 Horse 6 volt
1959 Panel 40 Horse 6 volt
1978 Transporter - 6 volts too many!

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests