WTB: Late Bay (78) Engine Compartment Items
Posted: Sun Jul 05, 2020 9:31 am
Well, this is an embarrassment. After many months, I thought I finally had my Bus back on the road with its rebuilt engine fully sorted. Actually, it was on the road, briefly. Somebody (me) forgot to tighten one of the fuel line hose clamps on the cold start valve. There were no gas leaks or smell during the initial startup or the maiden voyage, but on the second drive, it started leaking and a fire ensued. Luckily, it was quickly put out, but there's still a fair amount of damage. At this point, my list of needed items includes:
- 7-Pin FI Wiring Harness
- Heater Blower, plug, and wiring
- Taillight Wiring Harness
- Oil Breather Box
- Large rigid hose from the plenum to the decel valve
- Small rigid vacuum hoses to distributor, fuel pressure regulator, etc.
- Fan guard screen
- Evap system hose tee near the driver's side taillight
- Fiberboard panels on the top of the engine compartment
- Access hatch cover insulation
Please let me know if you have any of these items in good condition that you'd be willing to part with.
Check your fuel lines and clamps!!!!!!
What a year it's been......
- 7-Pin FI Wiring Harness
- Heater Blower, plug, and wiring
- Taillight Wiring Harness
- Oil Breather Box
- Large rigid hose from the plenum to the decel valve
- Small rigid vacuum hoses to distributor, fuel pressure regulator, etc.
- Fan guard screen
- Evap system hose tee near the driver's side taillight
- Fiberboard panels on the top of the engine compartment
- Access hatch cover insulation
Please let me know if you have any of these items in good condition that you'd be willing to part with.
Check your fuel lines and clamps!!!!!!
What a year it's been......