'59 Panel

[toolbox]

Bruce, If you don't want the old harness I will give it a good home in my box of wire for repairs on hacked vehicles.

[Dual Port]

Bruce, If you don't want the old harness I will give it a good home in my box of wire for repairs on hacked vehicles.

The next thing you'll be asking is for me to deliver it to Detroit...…….

[Dual Port]

Sean's bus is done and gone and all is well.

Here's the headlight bulb connectors, you don't think these would be a problem, do you?

Or this wire that fell out of the dimmer switch. We don't need that, it's only the low beam feed.

Here's the 8 fuse panel completed.

[SlashKirk]

Sean wanted to add disc brakes that he had purchased, so he brought the bus all the way out to this side of the bay bridge and I hooked him up.

Very clean and well engineered kit....pretty straight forward to install.

I like that it fits with stock wheels

[Marla]

Very Nice!

[Six Volt]

Many thanks to both Bruce and Kirk for finding the time to help make the panel a little more reliable and safe. Also a big shout out to Craig on the boat who came up with a 6V starter in a pinch! Who knew Craig was a closet 6 volter!
It’s a 70 mile ride to Kirks, but it’s teally nice up there. And unlike in October for KI, Netty’s was open!!!

929D956F-23DE-4115-8003-76A63C61986A.jpeg (133.71 KiB) Viewed 4806 times

[sweeth20007]

Congrats Sean very cool!

[72westie]

Still looking for a Single Cab? I have Widefive's old Single Cab.

[Six Volt]

Still looking for a Single Cab? I have Widefive's old Single Cab.

I should have bought it 10 years ago, but someone lowered it.

[72westie]

It’s stock height again